切換舊版網頁
 

THK AFC

THK AFC

附加檔案
檔案名稱 容量 下載
AFC_SDS_CHINESE.pdf 171 KB
THK AFC_SDS_ENGLISH.pdf 46 KB

 


AFC潤滑脂是使用了高級合成油作基油的尿素系增稠劑和特殊添加劑的,因此具有出色的耐微動磨損性。

特性

1.

出色的微磨損性
是新開發出的能充分發揮出色的耐微動磨損效果的潤滑脂。

2.

長壽命潤滑脂
與一般的金屬肥皂基潤滑脂不同,具有出色的氧化安定性,可長期間使用,從而能減輕保養的負擔。

3.

適用溫度範圍廣泛的潤滑脂
因基油使用了高級合成油,在54~ +177的廣泛溫度範圍內能發揮良好的潤滑特性。

 




 

AFC Grease has high fretting-corrosion resistance due to a special additive and a urea-based consistency enhancer which uses a high-grade synthetic oil as the base oil.

 

*Features

1.

High fretting-corrosion resistance
AFC Grease is designed to be highly effective in preventing fretting-corrosion. The following test data explains why this is so.

2.

Long service life
Unlike ordinary metal soap-based greases, AFC Grease exceeds in antioxidation stability and therefore can remain in service for a long time. As a result, maintenance work is reduced.

3.

Wide temperature range
Since a high-grade synthetic oil is used as the base oil, the lubricating performance remains good over a wide range of temperatures from -54 to +177 .




 

代表特性

測試專案

代表值

稠度 (25°×60W)

288

滴點

269

銅板腐蝕 (B100∙24h)

合格

蒸發量 (B177∙22h)%

7.9

離油度 (177∙30h)%

2.0

氧化安定度 (99∙100h) Mpa

0.031

夾雜物 /³

25~ 75μm

370

75μm以上

0

混合安定度 (10萬回)

3.41

水洗耐水度 (38∙1h)%

0.6

低溫扭矩 (54)

Nm

啟動時

0.439

運轉中

0.049

性能 (52∙48h)

1,1,1

振動試驗 (200h)

合格

使用溫度範圍

-54 ~ +177

 

耐微動磨損性的試驗資料

AFC潤滑脂因使用了尿素基增稠劑,高級合成油及特殊添加劑,所以能發揮出色的耐微動磨損性。

試驗條件

行程

3mm

每分鐘行程數

200min-1

總行程回數

2.88×105 (24 h)

面壓

1118MPa

潤滑脂裝入量

12g/1 (8小時給脂1)

 




Representative physical properties

Test item

Representative value

Consistency (25°,60W)

288

Dropping point ()

269

Copper plate corrosion (Method B, 100, 24 h)

Acceptable

Evaporation (Method B, 177, 22 h), %

7.9

Oil separation rate (177,30h) %

2.0

Stability of oxidation (99,100h)Mpa

0.031

No. of contaminants,
pieces/cm3

25 to 75μm

370

75μm min

0

Mixing stability (100,000 cycles)

3.41

Resistance to removal of grease during
the water rinse (38,1h) %

0.6

Low-temperature torque (-54)
N-m

Start

0.439

Running

0.049

Anticorrosive property (52, 48 h)

1, 1, 1

Vibration test (200 h)

Acceptable

Service temperature range

-54~+177

*Fretting-corrosion resistance test data

Because of its superior ingredients (namely a urea-based consistency enhancer), high-grade synthetic oil, and a special additive, AFC Grease provides high fretting-corrosion resistance.
The test data on the right-hand page compares AFC Grease with an ordinary bearing grease.

Test conditions

Stroke

3mm

No. of strokes per min

200min-1

Total no. of strokes

2.88×105 (24 h)

Surface pressure

1118MPa

Amount of sealed grease

12g/1ó (greased every 8 h)


相關產品